11-18-2018, 07:12 PM
Thank You!!! No mention of the GFCI location in the manual. It seems that the "Outlets" breaker just controls the outlet in the engine room and the "Galley Outlets" breaker, everything else. At least that is the way my boat is wired!
I did get the salon steps out eventually. The trim piece below the metal door frame had to be removed and to get to its screws, the bottom section of metal door-frame trim had to come off. Will be easy next time!
I could then access both the bilge pump and the mystery "fourth" bilge pump that lives with its float switch in a plastic box, forward of the big bilge pump.
Fair Winds,
Ed
I did get the salon steps out eventually. The trim piece below the metal door frame had to be removed and to get to its screws, the bottom section of metal door-frame trim had to come off. Will be easy next time!
I could then access both the bilge pump and the mystery "fourth" bilge pump that lives with its float switch in a plastic box, forward of the big bilge pump.
Fair Winds,
Ed
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)