06-08-2020, 12:03 PM
Hi there,
On our recently acquired 2700, the engine surveyor highlighted some concerning corrosion around the rear of the trans coolers (see photo) and recommended replacement of these.
The indicated part # is 63832A1 and the surveyor indicated that OEM is not needed on this part and they are relatively cheap. I see these that indicate they are US made - any issues going with these?
As for replacement, how involved is this? I have no experience with boat transmissions and since these involve both coolant (or is it raw water?) and the trans fluid, I'm concerned it could be quite a bear to do.
Any advice on this is welcome!
Thank you.
On our recently acquired 2700, the engine surveyor highlighted some concerning corrosion around the rear of the trans coolers (see photo) and recommended replacement of these.
The indicated part # is 63832A1 and the surveyor indicated that OEM is not needed on this part and they are relatively cheap. I see these that indicate they are US made - any issues going with these?
As for replacement, how involved is this? I have no experience with boat transmissions and since these involve both coolant (or is it raw water?) and the trans fluid, I'm concerned it could be quite a bear to do.
Any advice on this is welcome!
Thank you.
Thumbnail(s)


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)