[MC1600]

Good intel - thanks jlobon. I got some schematics from Tiara for the system, and I have the same set-up you mentioned. On the port side I can clearly see the water coming from the thru-hulls with just the occasional bubble from the skeg. There’s so much action on the stbd side, though, it’s hard to tell if exhaust is coming from the skeg, but I can feel it coming from the thru-hulls.

I’m going to try putting some weight on the port side and see if that fixes it. I’d love for nothing to be wrong more than a slight list, pushing that exhaust further under than the other side!!