Mid Bilge Light

[Chris Burkard]

As Uhehner eluded to, it not an immediate threat, but something that should be repaired as soon as you can get to it. If that light is on, most likely the pump is running. If the pump is running and there is no water in the bilge, your float switch is likely stuck or malfunctioning. Float switches are common failures and should be checked regularly. If the pump has run dry for an extended period (more than hour or so), I would replace it. These pumps are not designed to run dry for extended periods. Even if it still works, it may not pump its rated capacity after dry running.

Good luck and let us know how it works out.