[neto]

Here is what I have found out... So I spoke to Tiara customer service and they sent me to a company called Maritime wood products, they supplied the wood for tiara on my boat. I contacted them and they still manufacture teak and holly (solid burma teak planks and alternating strips of hard maple) for boats.. I was able to buy just the 1/2" strip of "holly" to repair the floor that looks black due to the water damage and my plan is to cut through the middle of the existing 1/2" strip & remove both parts, then i would also cut the bottom part of the groove of the new strip to be installed and place it on the teak plank groove, it should go right with slight pressure. This is how damaged tongue and groove boards are replaced on houses, hopefully it works on this as well.