06-19-2022, 09:51 PM
Greetings,
Found my wiper not working at commissioning. Checked the switch with a volt meter & seems to be working ok. I'm trying to take off the wiper motor to check the wires there (probably need to replace I'm guessing). I have the wiper arm off & removed the nut, gasket & everything else I could see. The motor doesn't want to come off. I can turn the motor about 1/2" & the splined portion of the shaft will rotate, but not the threaded portion. I tapped it (not too hard) with a rubber mallet but no luck.
Do I just need to use more force? Worried about the windshield! Thanks.
Found my wiper not working at commissioning. Checked the switch with a volt meter & seems to be working ok. I'm trying to take off the wiper motor to check the wires there (probably need to replace I'm guessing). I have the wiper arm off & removed the nut, gasket & everything else I could see. The motor doesn't want to come off. I can turn the motor about 1/2" & the splined portion of the shaft will rotate, but not the threaded portion. I tapped it (not too hard) with a rubber mallet but no luck.
Do I just need to use more force? Worried about the windshield! Thanks.
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)