[Misdirection]

If their like mine, remove interior screws, on the outside of the bkat, mine had a bead of caulk where the two meet. I had to cut that out with a razor blade. Then gently pry loose on the inside. Once the inside is removed, gently run a razor blade around the outside. Shims are very helpful here to help loosen and pry the outside loose.

Inspect the opening for moisture and repair if necessary.

Install is the reverse. Use a quality silicone in clear when you reinstall.

There are some youtubetv videos out there that show the process.

Sent from my SM-S901U using Tapatalk