[Jack Aperio]

   

Interesting,  I was looking at putting an H30 on my 4700 Sovran as well bit I noticed that you can’t get to the underside  of the platform.  I was wondering how I would be able to bolt it through.  This obviously looks like the trick to do so.  Nice job

I just upgraded from the Hurley H30 (400 lb capacity) to the H30+ (750 lb capacity), so I already had the tie downs/backing plates from my earlier installation. Only one access point was required for this upgrade but you may have to make at least three if you don’t already have existing tie downs. 

My yard retained the fiberglass piece removed and simply replaced it once the new davit pin plates were installed. We intentionally placed the hole where the repaired area would only require bottom paint to finish.