[MC1600]

First of all, a set of spare fuel/oil filters and belts. I’ve needed at least one on every boat I’ve ever owned.

In terms of specific tools, if you’re starting from nothing, I’d get a small starter kit (general set of sockets, allen wrenches, maybe needle nose pliers, and a couple open wrenches.

From there, you’ll kind of add as you need it, but the stuff I use the most are:

- Vise Grips or adjustable pliers
- Filter wrench
- 6-in-1 (basically a fancy screwdriver. Can be found at any Lowe’s/HD). Can be used as screwdriver and wrench on most hose clamps
- Rubber mallet
- Zip ties
- Spanner wrench for opening strainers
- Lighter
- Pipe dope (not teflon tape!)
- Electrical tape
- Telescoping magnet (you can thank me later)

I think that would get you started. Others might have more. But like I said, you’ll find you add as you go along.

Good luck!