07-06-2024, 10:21 AM
[quote="Sasha" pid='20542' dateline='1717422167']
BOTTOM work + Yearly Haul Out-November 2023: Bottom was sanded down and primed plus two coats of ablative CSC Black paint which is appropriate for these waters. Props trued and trimmed to 25" per the performance test curve by Tiara to reach 2800+ rpm's at 34 MPH. Shafts dialed and in specification, tanks flushed and cleaned after topping off with new diesel to reach all tank surfaces, primary and secondary fuel filters changed, new 1.7 SEASTAR hydraulic helm pump and Rudder cylinder, replaced tank senders with KUS Reed switch level sensor output 240-30 Ohms, dropped rudders, cleaned shafts and repacked, new cutlass bearings. Work performed at Cracker Boy's Fort Pierce - cost with haul, launch and bottom cleaning plus miscellaneous parts, consumables and materials $12k.
yes text (772) 538-7578 for further information. Thank you.
BOTTOM work + Yearly Haul Out-November 2023: Bottom was sanded down and primed plus two coats of ablative CSC Black paint which is appropriate for these waters. Props trued and trimmed to 25" per the performance test curve by Tiara to reach 2800+ rpm's at 34 MPH. Shafts dialed and in specification, tanks flushed and cleaned after topping off with new diesel to reach all tank surfaces, primary and secondary fuel filters changed, new 1.7 SEASTAR hydraulic helm pump and Rudder cylinder, replaced tank senders with KUS Reed switch level sensor output 240-30 Ohms, dropped rudders, cleaned shafts and repacked, new cutlass bearings. Work performed at Cracker Boy's Fort Pierce - cost with haul, launch and bottom cleaning plus miscellaneous parts, consumables and materials $12k.
yes text (772) 538-7578 for further information. Thank you.
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)
