01-14-2014, 05:32 PM
I had the same issue on our 1987 3100 open. I used a nut splitter to get the nut off. The threads were fine so we just replaced the handles and nuts.
Good tip on replacing the clamps... toss the old clamps, or at least mark them as used so they will not find their way back into service at a critical location.
Gary
Good tip on replacing the clamps... toss the old clamps, or at least mark them as used so they will not find their way back into service at a critical location.
Gary


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)