10-15-2025, 02:23 PM
My open has 3 wipers hence three windows. All motors wipers etc have been removed and then I tested each set of 3 wires. Yellow, white, black at each location. I’ve got port and center wiring working as desired with a constant 12v on one for the park position and when the switch is turned on it send power to the other wire to make the motor run. Now on the starboard wiper wires I’ve got zilch zero on a
The white and yellow wires no matter the switch position. The switch illuminates when switched on. The circuit breaker does not seem popped out. What would cause this condition?
The white and yellow wires no matter the switch position. The switch illuminates when switched on. The circuit breaker does not seem popped out. What would cause this condition?
