04-21-2014, 11:27 AM
Skmon,
Thank you for the reply. Here's what I discovered: the helm console on my boat is bolted down!
I have two 10-32 screws located where the friction mounts were on my previous Tiara, (a 2001), and I figured I'd unscrews the nuts and see what happened. Well that did it and my console sung back nice and smoothly. I found my electronics fuse panel and, sure enough, my 10 amp VHF fuse was blown. Replaced fuse and tested OK.
Now I think I'll modify the screw down console and install nice wing nuts for ease of removal.
Thanks again
Thank you for the reply. Here's what I discovered: the helm console on my boat is bolted down!
I have two 10-32 screws located where the friction mounts were on my previous Tiara, (a 2001), and I figured I'd unscrews the nuts and see what happened. Well that did it and my console sung back nice and smoothly. I found my electronics fuse panel and, sure enough, my 10 amp VHF fuse was blown. Replaced fuse and tested OK.
Now I think I'll modify the screw down console and install nice wing nuts for ease of removal.
Thanks again
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)