07-13-2014, 05:06 PM
I am not 100% on this but we had a similar issue with our crusaders; the alternators on the engines have voltage regulators; some won't start charging your batteries until your RPMs are between 800-1000; so at idle we noticed below 12 volts on the engine batts, but as soon as we got up to around 800 voltage regulators opened up and the batts were reading as they should. You can look up the part number on your alternators for a description of this.
Also, only one engine charges your engine batts and the other charges your house batts; at least that is what it says in our manual.
Hope this helps a bit.
Also, only one engine charges your engine batts and the other charges your house batts; at least that is what it says in our manual.
Hope this helps a bit.

