06-24-2015, 12:14 PM
I am using a Rhinda scanner. The Crusader manual mentions some alarms which may not set a code, so this is my problem-not all alarms will set a code. Sort of like trying to catch a shadow, you know its there but you can't grab it! So I ran the boat with the scanner hooked up to see if anything was out of spec even without setting a code-no luck yet. Since it only starts at 3000 rpm it may be low fuel pressure, next on my list to check.


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)