replacement courtesy lights

[Ohana John]

Why not install LED's and then glue the housing back together? The LED's should last the life of the boat.
Put some Corrosion Block on the terminals first.  Capt. George

I removed the original lights and opened up a can of worms.  The wire gage connected to the original lights is thick.  The LED lights have a very thin gage wire so finding the proper connectors proved to be difficult.  then the screws were smaller then what had been used to hold the original lights in place.  I had to use a resin to fill the holes then pilot drill and send new screws home.  Not fun!  I wish I had taken your advise.