02-17-2016, 08:56 PM
Rose - guessing these are the thick plexiglass ones like I had on my '88 31 open, about 1" thick. They are strong don't think you would break by prying open. Use a heat gun on low.
Anyway for new ones call Maritime Plastics in Annapolis behind the mall. I looked into replacing them as had a lot of crazing and were not cheap but he could make them. Owners name is Keith Fletcher. I had him make a cutstom plexi box for a flow meter and did a fantastic job.
You really had to dog these down tight to get sealed, new gasket should be pretty easy to find.
http://www.maritimeplastics.com
Ryan
Anyway for new ones call Maritime Plastics in Annapolis behind the mall. I looked into replacing them as had a lot of crazing and were not cheap but he could make them. Owners name is Keith Fletcher. I had him make a cutstom plexi box for a flow meter and did a fantastic job.
You really had to dog these down tight to get sealed, new gasket should be pretty easy to find.
http://www.maritimeplastics.com
Ryan
