Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1999 35 Open RPM's With Cummins 5.9 WOT 2700RPM
#13
IF you are adjusting the no load RPM (no load speed as seen on the Cummins data sheets) then you are still mis-adjusted. Spec for CPL 2208 (not sure if that is what you have) should be 

High Idle Speed Range Min    3300
High Idle Speed Range Max   3400

So you should be between those 2 numbers. I have enclosed the data sheet, High Idle can be seen near the top. 

[Image: 370B%20%20Curve-CPL%202208-%20Dec%2000.jpg]
Tom
[-] The following 1 user Likes trit21's post:
YOLO (04-06-2016)
Like Post Reply
  


Messages In This Thread
RE: 1999 35 Open RPM's With Cummins 5.9 WOT 2700RPM - by trit21 - 04-05-2016, 09:31 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  38 open bathroom recessed light bulb twilson0929 3 313 08-26-2026, 06:22 AM
Last Post: twilson0929
  Replacement of Carbon Filter on vent line from Holding Tank. 38 Open ReelMagic 1 293 08-18-2026, 02:11 PM
Last Post: hiccup
  2001 38’ Open interior table base removal twilson0929 3 634 07-07-2026, 08:13 AM
Last Post: hiccup
  1996 33Tiara open - shaft seal lubricant leaking Mydiamond 4 1,260 05-22-2026, 06:41 PM
Last Post: Mydiamond
  [Tiara Open] 2001 3800 Open Holding Tank cap that hold sensor and washdown twilson0929 0 694 05-12-2026, 10:18 AM
Last Post: twilson0929



Users browsing this thread:
1 Guest(s)

1999 35 Open RPM's With Cummins 5.9 WOT 2700RPM00