Marine Liquidators in Ft Pierce has them used and in good shape. I had to replace one of mine and I know they have a bunch of them on the shelf. They will help you over the phone and send to you, if you need help let me know and we work something out as I am there almost every weekend.
P/N is the second line you see, not the top one. FYI. 332-201B
They can also be taken apart and cleaned, remove the nut, push on the back prongs and screw that you removed the nut from and the front bezel, face and entire gauge will pop off in your hand. Clean up the inside, spray with Wd-40 and Corrosion X , reassemble and they might start working. As a side note, on my Tiara 3500 there is a relay that provide the voltage to that gauge and sometime, happened on the other side on my boat, it has to be replaced and then the gauge will start showing the correct voltage. My relays were located on the rear of the instrument panel near the voltage gauges.
P/N is the second line you see, not the top one. FYI. 332-201B
They can also be taken apart and cleaned, remove the nut, push on the back prongs and screw that you removed the nut from and the front bezel, face and entire gauge will pop off in your hand. Clean up the inside, spray with Wd-40 and Corrosion X , reassemble and they might start working. As a side note, on my Tiara 3500 there is a relay that provide the voltage to that gauge and sometime, happened on the other side on my boat, it has to be replaced and then the gauge will start showing the correct voltage. My relays were located on the rear of the instrument panel near the voltage gauges.
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)