01-30-2017, 06:52 PM
I have done this a couple times. I bought a small bilge pump (360GPH?) and submerged the pump in a 5 gallon bucket filled with 2 gallons of RidLyme which is similar to BB. Hose from pump outlet went to the tranny/oil cooler inlet after removing hose from engine raw water pump to oil cooler. I also removed the HX outlet hose and installed a temporary hose from the HX output to the bucket. Let it run a couple hours. This also works well on the air conditioners.
Bob
Bob


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)