07-08-2017, 05:45 AM
I've added a very small amount of hydraulic fluid, made specifically for the system (hynautic steering fluid) to my system to ensure it was full.. Remove the fill cap near or on the helm steering wheel and use the adapter (Tiara provided when boat was delivered) to connect the steering station fill to the quart bottle of hynautic steering fluid ( may need to put a small hole in the bottle to allow air to enter the bottle.. Turn the wheel to the stops and then in the other direction. If needed fluid will go from the bottle to the helm system by itself. When the system is full it should be near or at the top.. M2C.
