[borcheb]

I have a 1996 Tiara Express 40, on the port side below the engine I have water that collects along the engine support stringer running fore and aft. I do not understand why the water is collecting there and not draining to the lowest point in the boat (i.e. mid bilge area or aft bilge area). I feel there may be a plugged access hole which is trapping the water and not allowing it to drain properly. However, I cannot locate a hole for the water to drain through. Any insights is appreciated and how I can get this water to reach the mid bilge or aft bilge to be expelled by the bilge pumps.