[Matta0413]

Hello,

While on vacation last week I developed a leak which I tracked down. The idiot who installed the vacuflush head for the prior owner cut the Pex under the sink and spliced it back together with piece of rubber tubing and a couple of hose clamps. Of course the clamps were loose and started leaking. I want to repaid this the right way and was thinking a SharkBite would be the best way as they is no room to get a crimp tool in there. Does anyone know what size Pex Tiara used in 2002 for fresh water lines?

[TIARA44]

Hi,

On my 2005 it is 15mm PEX. Call the factory with your HIN, and they can check pretty quick for you. Defender in CT has a good supply of PEX fittings and tubing.

[wallyman424]

15mm. I used whale brand tubing and fittings on my 2005 2900 coronet. I've been on a few 3100's and it looks the same.

[Sans Peur]

I did some new plumbing on my 41 and I used the shark bite fittings from Home Depot. Worked great and much less than elsewhere.

[Matta0413]

Thanks all. I found the Whale brand. Just ordered.

[CaptGregSTX]

Hello,  

While on vacation last week I developed a leak which I tracked down.  The idiot who installed the vacuflush head for the prior owner cut the Pex under the sink and spliced it back together with piece of rubber tubing and a couple of hose clamps.  Of course the clamps were loose and started leaking.  I want to repaid this the right way and was thinking a SharkBite would be the best way as they is no room to get a crimp tool in there.  Does anyone know what size Pex Tiara used in 2002 for fresh water lines?

15mm (1/4" fittings will not work..I can attest to that)

[Matta0413]

Well I figured out why he used the hose and clamps. 15mm existing PEX, and he plumbed the head with 1/2". I had to make up a 15mm to 1/2" coupler to fix. I could not find a 15mm to 1/2" straight through anywhere. Used a 15mm to male NPT and a 1/2" to 1/2" Female NPT. All set.