Posts: 15
%%TYL_NUMTHANKEDLIKED%%
Threads: 5
Joined: Jun 2020
Reputation:
0
Home Port: cleveland ohio
Vessel Info: 1996 Tiara 31 Open
I have a 1996 Tiara Open with a gas powered 454 Crusader 7.4 MPI Engine. It is my first year with the boat and i am starting to winterize and called to get oil and filter spec. Marine west asked me if the engine block is a chevy or a ford. how do I determine what blocks Crusader was using in 1996? Plan on using Rotella 15W40 oil. Appreciate any other advice on anything special to winterize (drain water, blow out lines, etc all on the list). Thanks.
Posts: 261
%%TYL_NUMTHANKEDLIKED%%
Threads: 9
Joined: Jul 2011
Reputation:
4
Home Port: Daytona Beach, FL
Vessel Info: 2000 Tiara 3500 Open
Cummins 6bta -370
If it is a true 454, Chevy, Ford made a 460 but I don't think they ever made a 454. But, if so, I will stand corrected.
Tom
Posts: 463
%%TYL_NUMTHANKEDLIKED%%
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
A Fram PH8A (or comparable) oil filter and Rotella 15W40 will work just fine; as mentioned its a Chevy 454 block.
If its raw water cooled, drain the water from the block, manifolds, and pull the pencil zinc and drain the oil cooler. Pull off the cooling hose at the thermostat and pour in some Pure Oceans -50 antifreeze.
Make sure to get the water out of the raw water strainers if you dont run antifreeze thru them.
Sent from my SM-A505U using Tapatalk
Posts: 15
%%TYL_NUMTHANKEDLIKED%%
Threads: 5
Joined: Jun 2020
Reputation:
0
Home Port: cleveland ohio
Vessel Info: 1996 Tiara 31 Open
thanks to all for your comment!
Posts: 43
%%TYL_NUMTHANKEDLIKED%%
Threads: 16
Joined: Nov 2011
Reputation:
0
Home Port: Red Bank, New Jersey
Vessel Info: 1996 Tiara 29 open, Twin Crusaders 454XLI
These engines are GM. I have the same year in a 29 Open. Recommended oil weight is straight 40.