Posts: 3
Threads: 1
Joined: Mar 2021
Reputation:
0
Home Port: Solomon’s Island, MD.
Vessel Info: 2003, 2900 Open. Twin 454 Crusader engines. 5.7 liter.
Hello all. I’m the proud new owner of a 2900 open 2003. And for the life of me I can’t figure out how to lower the dinette table. I’ve spun it a few times but nothing seems to loosen. Perhaps I need to keep spinning but thought I’d ask before I screwed something up. Any advice is greatly appreciated. I’m sure I’m just over thinking it. Thank you in advance.
-Teddy
Posts: 45
Threads: 13
Joined: Sep 2013
Reputation:
0
Home Port: Bellevue, WA
Vessel Info: 1995 31 Open with fuel-injected 454 Crusaders
My older 31's dinette table is mounted on 2 pedestals and there are 2 sets of pedestals - high and low. The table top lifts off the pedestals and, once removed, you can exchange the pedestals.
Posts: 3
Threads: 1
Joined: Mar 2021
Reputation:
0
Home Port: Solomon’s Island, MD.
Vessel Info: 2003, 2900 Open. Twin 454 Crusader engines. 5.7 liter.
Thank you for the info. I’ll have to take a look and see. But that just may be it. Not sure I have the smaller pedestal unfortunately.
Posts: 6
Threads: 0
Joined: Feb 2021
Reputation:
0
Home Port: Massachusetts
Vessel Info: 1989 3600 Convertible .Twin Crusader 454
In sub forum parts classified there is a fellow selling pair of adjustable legs from his 3500. May not be pertinent to your question but I think the way he went with thier replacement was interesting.
Posts: 58
Threads: 9
Joined: Jun 2019
Reputation:
3
Home Port: NY, Long Island, South shore
Vessel Info: 1998 4000 Express, Cat 3208
on my 31 you pull up on the table to get it off the pedestals, pull the pedestals out of the deck, and rest the top on a ledge that goes around the inside of the seat or stow it above the berth
Posts: 9
Threads: 1
Joined: Jan 2019
Reputation:
0
Home Port: Long Island sound, Cape Cod
Vessel Info: Tiara 3000 Open 2007
8.1 mpi
Just read post
I own 07 . 3000 open
On mine, dinette table pulls up and off and the pedestal has a black cap @ the bottom/ base that unscrews to release pedestal
Hope this helps
Posts: 3
Threads: 1
Joined: Mar 2021
Reputation:
0
Home Port: Solomon’s Island, MD.
Vessel Info: 2003, 2900 Open. Twin 454 Crusader engines. 5.7 liter.
After some fooling around I figured it out. It just lifts right up and the pedestal pulls out and a shorter pedestal goes in for the sleeping conversation. Thank you all for your helpful responses. So glad this Tiara community exists and I’m sure I’ll be back soon. Happy boating!!!
-Teddy