Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Port oil filter change
#1
Dock partner and I are struggling to figure out how to remove port oil filter from a 1995 40 express with Cummins. Any help would be greatly appreciated. Bang Head
Like Post Reply

#2
I have a 94 4000 express that filter was moved inboard on portside engine
Like Post Reply
#3
On my 41 open the filters were also moved to the otherside of the engine.
Sounds to me like you need to buy the kit and get a small skinny guy to go back there and install it.
Sans Peur 2003 Tiara 50 Open
Like Post Reply
#4
Or is the problem actual removal (and not location)? If so, recommend eating up the engine well first and using a strap wrench of someone put them on too tight.
Like Post Reply
#5
Ordered the remote kit, seems like it might be easier to install than reinstalling the filter due to its size. The proper size oil filter wrench worked well on the starboard side to loosen but seems difficult to reach and not spill on the port. I'll follow up on this thread with the remote installation. Thanks everyone!
Like Post Reply
#6
Curious how the remotes weren’t done at the factory. Wonder if they were rebuilt and not done (or undone)?
Like Post Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Oil Filter ? giff1 1 1,326 09-24-2023, 06:54 PM
Last Post: ReelMagic
  How to change transmission oil on 4000 Express w CAT 3208's frank.koetter 7 4,799 09-26-2022, 04:33 PM
Last Post: frank.koetter
  Oil change interval honest mark 6 6,889 08-10-2021, 12:14 PM
Last Post: August Rush
  2006 Volvo D6-370 air filter removal gdynkowski 2 2,616 04-17-2021, 05:32 PM
Last Post: gdynkowski
  Oil change interval Cat Todaystheday 2 3,362 09-21-2020, 08:03 AM
Last Post: Todaystheday



Users browsing this thread:
1 Guest(s)

Port oil filter change00