Small Diameter Courtesy Lights

[Newbie7749]

One of the courtesy lights on my Coronet is out; and I figure I would use this opportunity to replace with LED lights.

The cutout though only has a one inch opening.  Does anyone have a good recommendation for a replacement courtesy light of this size?  Most I have seen require a 2 inch opening or so.  I'd prefer to not enlarge the opening or go with a full surface mount light.  Thanks.

[MC1600]

I just used this place to replace my overhead cockpit lights. Very impressed with the service, price, and quality. If you can’t find what you’re looking for at first blush, highly recommend just giving them a call. Very helpful.

https://store.marinebeam.com/

[bruce@bigrivergroup.com]

Can you send me a photo?  bruce@bigrivergroup.com

[Trainman]

One of the courtesy lights on my Coronet is out; and I figure I would use this opportunity to replace with LED lights.

The cutout though only has a one inch opening.  Does anyone have a good recommendation for a replacement courtesy light of this size?  Most I have seen require a 2 inch opening or so.  I'd prefer to not enlarge the opening or go with a full surface mount light.  Thanks.

The Cantalupi LEDA was discontinued a few years ago. Another very similar model available below:

https://www.apexlighting.com/boat-lights...esy-light/

--

Petro Ploumis ::
Apex Lighting, Inc.
4600 N. Powerline Road:: Deerfield Beach, Florida 33073
tel (954) 421-3267 ::

[Bdouglass]

Imtra out of New Bedford Massachusetts. I just replaced mine. If you email Tiara directly, they will tell you the name of the original light and imtra will sell you the replacement. Mine have the 1.06 inch opening as well, I imagine it’s the same light, but check with Tiara first.