Posts: 43
Threads: 16
Joined: Nov 2011
Reputation:
0
Home Port: Red Bank, New Jersey
Vessel Info: 1996 Tiara 29 open, Twin Crusaders 454XLI
On my 1996 29 Open there are three deckplates ( inspection ports ) in the cockpit that are cracked and need to be replaced. Does anyone know what sealant or chalk is used by Tiara and how to remove the old sealant? Thanks
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
Mine are bedded with clear silicone ( I would use the 50 year no-mold GE type ). Scrape off as much of the old stuff as possible and clean the area with acetone first. An exact replacement should be available from e-Bay or West Marine. Capt. George
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
5200 is a forever adhesive. You could never change them again. Stick with the silicone. Capt. George
Posts: 60
Threads: 6
Joined: Oct 2013
Reputation:
0
Home Port: Ludington, MI
Vessel Info: 31 Open, 1996 with Crusader 454 XL
I like Life Calk over silicone in boat sealing.
Question for you where did you find new deck plates and are they the correct color for the deck gel coat?
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
Life Caulk is a great caulk especially for transducers. It's a little bit more difficult to do a neat job because it is so thick. Silicone comes in colors and squeezes out more easily. Use dish soap and water to smooth the caulk with your finger. Be sure to mask the area for a quick clean up. Your choice.
NEVER use 5200 on a transducer if you ever expect to change it.
Capt. George
Posts: 92
Threads: 14
Joined: Mar 2011
Reputation:
2
FYI, i replace all of mine and i believe the originals are 5200'ed in there. I use a hear gun with a little scraper to fork them off. I've removed a few other "original items" that I'm pretty sure Tiara used 5200 on and with a little patience and caution work out fine. Just be careful of the heat load on the fiberglass / plastic. Get it overall warm slowly and it'll peal out.
