[captdon6]

I have a 1999 Tiara35 open, this weekend I noticed a burnt out light bulb in the ceiling of the head. I tried pulling down on the spring of the fixture, but I couldn't pull it down far enough to change the bulb. Any suggestions how to change the burnt out bulb?
Thanks,
Don

[trit21]

I think the entire fixture is held in with the side springs. I have not had to replace that one on my 2000 3500 Open but have replace a bunch in the salon. They just pull down and the spring bends backwards until it come out of the hole. It is designed to do that and putting it back in just reverse. Take one out in the salon and make sure it has the same type of mounting as I am not sure. Just be careful, when the springs comes out of the hole it will spring all the way to the front of the fixture and get your fingers real bad. Once you see the springs, hold them and not the fixture to they don't draw blood and they will for sure. Been there, done that.

[Only registered and activated users can see links Click here to register]

Link above shows the type that are in the salon, not sure about the head but would think they are the same. ?

Tom

[sbw1]

We call them "mouse traps."