[Dakota773]

Hey Tiara guru's!



Has anyone every retrofitted Pantographic wipers on any older Tiara models and or can provide some guidance?  Just wondering if it's possible and or what issues there might be?

[tst1927]

i am planning the same upgrade to my 88' 2700 and would also be interested in responses.

[Silver Rush]

I did it on my 96 31 with reusing the motors and changing the arms and blades worked great

[Silver Rush]

I did the upgrade on my 96 31 open and used IMTRA  arms, plates, 21" blades and their wash nozzles.
The motors were left as stock.
This issue I had was the top of the arm was longer than stock and hit that plastic above the windshield that the top front vinyl window attaches to.
I needed to remove the plastic and route out clearance for the top of the arm. This left the plastic very thin so I made a square panel out of 1/4' starboard matching the OEM black plastic and screwed it in from the inside on top of that panel to cover the thin area and reinforce that panel it works great. 
IMTRA told me to stay at 21' with the OEM motors but they pull fine and I may go up to larger arms in the future.
I was going to add a center wiper but chickened out drilling the new hole.