Posts: 9
Threads: 4
Joined: Mar 2018
Reputation:
0
Home Port: Perth Werstern Australia
Vessel Info: Tiara 3800 Open
Trim tabs on Tiara 3800 Open do not open. Bennett Pump oil is full.
Is there a relay switch associated with the switches on the dash? If yes then where is it located?
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
Last Bennett system I worked on had no relays. 12V ran direct from switch panel to reversing motor and valves in the pump. Regardless first check for fuse/breaker per previous post, then check for 12V at pump.
Posts: 702
Threads: 14
Joined: Dec 2010
Reputation:
11
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
10-05-2018, 03:31 PM
(This post was last modified: 10-05-2018, 03:33 PM by ReelMagic.)
Where is the Charles EMI Isolator located?????? Don't remember seeing IT on on my 2003 38 OPEN
Posts: 9
Threads: 4
Joined: Mar 2018
Reputation:
0
Home Port: Perth Werstern Australia
Vessel Info: Tiara 3800 Open
The EMI Suppressor is located next to the trim tabs pump, aft where all the auto pilot steering gear is located
Posts: 32
Threads: 7
Joined: Sep 2016
Reputation:
0
Home Port: Onset Bay Marina, MA
Vessel Info: Tiara 2900 Open
(09-25-2018, 09:24 PM)jclark003 Wrote: Last Bennett system I worked on had no relays. 12V ran direct from switch panel to reversing motor and valves in the pump. Regardless first check for fuse/breaker per previous post, then check for 12V at pump.
I have the same issue, to bypass it did you just connect the "Ins" to the "Outs" ????
Thanks.
-----------------------------------------------------------------
HarmoneE²
Tiara 3800 Open, Onset MA
