[Silver Rush]

I bought a 96 31 open and have a question on the stock bed cushion configuration, my boat has a large hinged cushion that looks stock. It has a small almost square cushion that is in the same Ultra Leather as the dinette cushions and a second kind of triangular shaped cushion that looks homemade both sit on individual wood supports and fill in the gap by the dinette and cover a storage area. Does anyone have a picture of the stock set up or dimensions of the original cushions (the small ones?) picture attached

[Dakota773]

Hi Silver R

I have a 98 31 Open, Compared to my set up, the triangular element looks to be a Custom addition. Mine has a straight across cushion that allows the closet to open a full 90'. This cushion and the backer board are removable to allow easier access and step up the bunk. When the cushion and backer are removed there is also a little seat (outboard) which is covered by the small leatherette covered element (again with storage below). Looks like a custom job to create a little more bunk space.

My rig is in the warehouse for the season, but I'll make it a point to get a couple of pix in the next few weeks.

[Silver Rush]

Thanks, I want to return it to stock as my wife bought sheets and the small section of fitted sheet does not fit on the custom cushion in my boat.
Paul

[Chris Burkard]

This is a photo of the factory berth filler piece. This was an option and was not standard. As you can see, it goes straight across and does not angle back.

[Only registered and activated users can see links Click here to register]