Radar Arch strength
#1
On a 1988 31 open does anyone know if the arch can support the pull of a wakeboarder.
Reply
#2
No...it's not designed for that type of load.
Mark - Reely Nauti
Reply
#3
(07-20-2015, 10:15 AM)ReelNauti Wrote: No...it's not designed for that type of load.

Sounds like a potentially expensive mistake.
Reply
#4
Thanks, That was my thought too.  Figured someone else may have tried it.
Reply
#5
Nope, not designed for that type of load and especially not designed for horizontal load. That arch is thin fiberglass (to be light weight), I believe and I bet it is only thru-bolted with small 1/4" bolts. It is very likely the strain will rip the bolts through the fiberglass. That arch was only designed to take the load of a few antennas and possibly a radar array. A skier or a wake boarder can generate 500 - 1000lbs of force (especially a wake boarder). That would rip the arch off the boat.

An arch designed to handle that would have to be custom made and through bolted with very large backing plates.

Just my $.02.
Chris Burkard
cburkard@burkardyachts.com
239.253.3670
[Image: burkard-sig.jpg]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Radar johnnyp 5 7,182 05-14-2015, 04:57 AM
Last Post: ReelMagic



Users browsing this thread: 1 Guest(s)
Advertisements

>