Posts: 16
Threads: 10
Joined: Nov 2015
Reputation:
0
Home Port: Connecticut
06-26-2018, 11:52 AM
(This post was last modified: 06-26-2018, 11:53 AM by bell2132.)
Installed a new Raymarine Auto Pilot EV-200 with a p-70r head in our 38 open. When engaged at cruise, boat constantly makes 10 degree plus s-curves. Does anybody how to eliminate these? When running dockside wizard what are the hard-over times and rudder degrees etc? Any advice?
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
I would recommend calling Raymarine and seeking their advice if you haven't already. Hopefully it is an easy fix.
Sent from my XT1635-01 using Tapatalk
Posts: 705
Threads: 14
Joined: Dec 2010
Reputation:
11
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
Not sure about a Raymarine Auto Pilot but on my 38 Open I have a SIMRAD AP21. There are several settings that are configurable as part of dockside setup. Included is system gain that can be adjusted to account for what you describe. Too much gain and you get "S" turns. Too little gain and the system has a problem holding course.. Take a look at the manual and I'm sure there is something similar for Raymarine Autopilots..... I adjusted mine years ago as part of the system setup and the boat tracks quite well without making "S" curves that can be seen in the boats wake...M2C.. Hope this helps....