Posts: 1
Threads: 1
Joined: Aug 2018
Reputation:
0
Home Port: Boston
Vessel Info: Robalo 24ft; looking to move up to a Tiara
08-09-2018, 09:32 PM
(This post was last modified: 08-09-2018, 09:32 PM by stirus.)
I'm considering a Tiara for my next boat but I'm seeing that there have been some wet hull issues. I've looked for other discussions but haven't yet determined if this is restricted to certain years/models. Any help is appreciated.
Posts: 3
Threads: 1
Joined: Jan 2019
Reputation:
0
Home Port: Lake Erie
Vessel Info: 3600 Open, 454/350 engines
Older Model Tiara's that had aftermarket Anchor roller and Windlass installed are common wet coring issues. Also hull portholes are another area of concern. Not uncommon with later model hulls are wet coring below the air boxes. As much as believe Tiara makes great boats, they are not perfect. Do not buy one without a Survey.
Posts: 229
Threads: 45
Joined: Dec 2016
Reputation:
2
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
I looked at 3 before I bought the one I have now. On the other 2 the "Wetness" issues where in the stern. And both had very old scuppers that should have been replaced because of dried out sealer and small cracks. Also on one the seal around the transom door obviously needed attention. Most of the rest of the boat was dry with the exceptions of some rebedding that needed to be done around the port holes. On all three boats the deck, and main hull (With the exception of the transoms) were all in good shape. All three boats were 17-20 years old.
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
01-30-2019, 09:00 AM
(This post was last modified: 01-30-2019, 01:20 PM by Misdirection.)
I purchased an 86 36' Open this past spring. Most everything was dry. Surveyor suggested rebedding the port lights and hinges on the fishwell. For an old boat, she's in exceptional shape....
Sent from my XT1635-01 using Tapatalk
Posts: 15
Threads: 7
Joined: Apr 2018
Reputation:
0
Home Port: Long Island sound
Vessel Info: 1999 31 Tiara
454s
On a 1999 31 is the entire hull cored or just above the waterline??
Posts: 163
Threads: 12
Joined: Dec 2016
Reputation:
0
Home Port: South haven,mi
Vessel Info: 2006 3200 0pen 8.1 crusaders
Pretty sure there is no coring below waterline on any Tiara.
Posts: 229
Threads: 45
Joined: Dec 2016
Reputation:
2
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
Contact Tiara, they will tell you. They had a system for the stringers I think where the stingers were cored but the coring was just to act as a form for the fiberglass. Just email or call them, they will tell you.