Posts: 95
Threads: 30
Joined: Apr 2017
Reputation:
0
Home Port: Chester MD
Vessel Info: 2006 47' Tiara
705 hp Cat C-12
Has anyone had any success with replacement of the center window wiper motor ????
I have talked with Brian Kane at TIARA and he states i need the following:
Part # 334229 WIPER, MOTOR AFI-GM2 #37291 (95 DEG.)
Made my AFI . # 37291
can't seem to find this anywhere ????
Help?
Thanks,
Posts: 23
Threads: 6
Joined: Dec 2016
Reputation:
0
Home Port: Hampton, VA
Vessel Info: 3600 Open Sportfish; 435HP Cat 3208
My 36 had AFI wiper motors and I replaced them with Five Oceans Heavy Duty Wiper Motor found on Amazon. These seem to be a direct replacement for mine except for the wiring connection is a spade connection vs. a screw terminal. They have the home park option as well. Good luck.
Posts: 18
Threads: 7
Joined: Dec 2017
Reputation:
0
Home Port: St. Croix
Vessel Info: "Wasted Time"
St. Croix, USVI
2002 38 Open
Cummins 6TCA
Would you mind sharing the exact model that you purchased from Amazon and let me know if you had any issues with clearances or issues closing the center window and rubbing against the fiberglass? I had a similar problem to many others where the wiring corroded and would like to replace the entire motor, but only if the form factor of the replacement is the same or smaller than the original AFI model.
Thanks much!
Capt Greg
Posts: 18
Threads: 7
Joined: Dec 2017
Reputation:
0
Home Port: St. Croix
Vessel Info: "Wasted Time"
St. Croix, USVI
2002 38 Open
Cummins 6TCA
Yes, I replaced the wiper motor with a smaller form factor one, with less overall range, but it works well and looks good. Found an AFI Marine Wiper Motor NEW Part # 37181 with an 80 degree range for less than $150 on eBay. The overall form factor was smaller and had to drill a hole for the set screw (and fill the old screw hole), but it works great and looks factory.