Posts: 215
Threads: 94
Joined: Oct 2018
Reputation:
1
Home Port: ludington michigan
Vessel Info: 2003 4200 open qsm 11 660hp
would like to install a more powerful raw water washdown on my boat, is that a big job? is it as simple as just changing the pump to a more powerful one? do i have to change any plumbing or fuses? mine is just too weak of stream for my liking, thanks in advance.
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
You will need to check the breaker and wire size to your current pump and make sure it will be sufficient for the new one.
I changed my nozzel and hose last year and it made a difference in mine. Not a huge improvement, but enough for me to keep my current setup for now.
Sent from my SM-A505U using Tapatalk
Posts: 163
Threads: 12
Joined: Dec 2016
Reputation:
0
Home Port: South haven,mi
Vessel Info: 2006 3200 0pen 8.1 crusaders
I changed mine to 7 gpm it was a improvement but not what I was hoping for. I think the quick connects and the diameter of the hose are slowing the gpm out of the nozzle. Make sure your strainer is clean, In south Haven we had terrible duck weed last year and it will plug up anything. I know in ludington you are graced with really clean water but there will still be some in there.
Posts: 59
Threads: 20
Joined: Aug 2019
Reputation:
0
Home Port: Suffolk County, NY
Vessel Info: 2001 38 Open; Cummins 6CTA8.3 450HPx2
Look fir higher PSI pumps, not just GPH
Posts: 398
Threads: 37
Joined: Jun 2020
Reputation:
3
Home Port: Annapolis, MD
Vessel Info: Currently looking
What kind of hose are you using on deck? The small diameter spiraled hoses I think work the best to keep pressure up.