4200 Open with 660 Cummins range?
#1
Looking for real world experience as far range goes on the 42 with the 660 Cummins. Thanks in advance!
Reply
#2
(08-12-2021, 09:36 AM)Stripedo Wrote: Looking for real world experience as far range goes on the 42 with the 660 Cummins. Thanks in advance!

I know this is an old thread but I just purchased a boat with this setup.  I had a great trip home but had to winterize it when I got back to port since it was getting cold at night.  I am installing EGT sensors and am looking for any information I can get to understand the best way to run the engines.  Looking for engine reliability as the priority followed by economy.  
Do you mind providing some information on how you run the boat?  Did you ever get your range questions answered? 
Thanks
Joe
Reply
#3
You're smart to be adding EGT sensors to these motors. They were shipped over-propped from the factory and the dry turbo & exhaust manifold design makes the motors extremely sensitive to overload. Make sure you're EGTs are in check, the engine room isn't overheating, watch for exhaust leaks, and if you want to really gear them towards reliability, underprop them!
Reply
#4
Congrats on the new boat! As mentioned above, under propping is a good way to make your engines last a long time. Check out Seaboard Marine's "Tony's Tips" and the forum. He is a wealth of knowledge on Cummins engines. He likes to run them conservatively and is looking to get the most life out of the motors. sbmar.com
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  3500 Open deck lift piston drmiagi11 6 1,194 Yesterday, 10:03 AM
Last Post: hiccup
  38 - 43' Tiara Open Comparision ClayPlatt 8 8,839 10-27-2026, 02:44 PM
Last Post: tk17
  2001 3500 open, diesel exhaust flanges? North Star 4 1,650 02-24-2026, 08:55 AM
Last Post: North Star
  1989 33' Tiara Open - Bedding Question jgaudet2 2 2,313 12-21-2025, 10:02 AM
Last Post: jgaudet2
  2003 3100 Open cabin privacy curtain. Hilary 3 2,987 12-02-2025, 02:13 PM
Last Post: E-MAN



Users browsing this thread: 1 Guest(s)
Advertisements

>