Tiara 3500 Express
#1
Has anyone installed flush mount rod holders in the Gunnels?
I have a 98 3500 Express.
Reply
#2
Yep.. I have a 2003 38 Open and installed 3 on each side.... 2 in each of the gunnels and 1 each mid way up on the rear portion of the cabin top. Used 3M 5200 to seal the exposed balsa on the gunnels and on each screw used..... faced the rear ones straight back and the forward ones at an angle so the rods face somewhat out (approx 30 degrees outboard).... M2C
Reply
#3
(06-20-2017, 04:59 AM)ReelMagic Wrote: Yep.. I have a 2003 38 Open and installed 3 on each side.... 2 in each of the gunnels and 1 each mid way up on the rear portion of the cabin top. Used 3M 5200 to seal the exposed balsa on the gunnels and on each screw used..... faced the rear ones straight back and the forward ones at an angle so the rods face somewhat out (approx 30 degrees outboard).... M2C


Can you post some pics of the ones on the cabin top?


Sent from my iPhone using Tapatalk
Reply
#4

.pdf   rod holder.pdf (Size: 159.22 KB / Downloads: 49)
Sorry it took so long. Needed to get to the boat and get the picture.... It's on a 38 Open[attachment=376][attachment=376]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1995 3500 Express LFP/Inverter Install penneyma 0 706 09-09-2026, 07:09 PM
Last Post: penneyma
  Adding a generator to a 3500 open Simpleg1 1 2,020 09-09-2026, 06:53 PM
Last Post: penneyma
  4000 Express Swim Platform Repair Jack Aperio 3 1,698 01-01-2026, 02:03 PM
Last Post: Jack Aperio
  Factory Tiara Classic Hardtop jmk 33 50,536 06-08-2025, 09:22 AM
Last Post: Craig Dunlop
  4000 Express tender/davit install Jack Aperio 7 6,225 05-31-2025, 09:05 AM
Last Post: Jack Aperio



Users browsing this thread: 1 Guest(s)
Advertisements

>