Posts: 33
Threads: 15
Joined: Jan 2015
Reputation:
0
Home Port: Seattle
Vessel Info: 2005 Tiara 2900 Crusader 6.0L engines
The manual for the 2005 Tiara 2900 that I just bought says that there are two knobs on either side of the helm alongside the engine gauges which when pulled or unscrewed will allow the helm to swing back exposing the instrument fittings etc. No such knobs exist. A search of this site seems to indicate that one reaches back to the front part of the helm and pulls up on the lip. I tried that but without a lot of pressure because I did not want to break something. Appreciate anyones thoughts on this.
Posts: 33
Threads: 15
Joined: Jan 2015
Reputation:
0
Home Port: Seattle
Vessel Info: 2005 Tiara 2900 Crusader 6.0L engines
Thanks. Your suggestion seems to be the on;y way that the helm can be pulled back. I will try it.
Posts: 33
Threads: 15
Joined: Jan 2015
Reputation:
0
Home Port: Seattle
Vessel Info: 2005 Tiara 2900 Crusader 6.0L engines
A friend suggested giving the wheel a good pull and the whole helm would come forward. I tried it and it worked just fine.
Posts: 453
Threads: 30
Joined: Feb 2013
Reputation:
0
Pulling on the wheel is a good way to bend it. I agree that using the shift and throttle handles is better if you don't have a handle or recess to use at the top of the helm.