Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Boat lift for 3500 open question
#1
I'm about to purchase a 3500 open w / Cummings diesels , generator and hardtop . Will a 20 K lift be enough for this vessel ? Or do I have to go up to a 24 K lift . I have a pretty good price for a 20 k lift but when I asked about upping the lift to a 24 K , the price went up substantially . So my question is , how much capacity do need ??? 20 K or 24 K ???? Oh yea, it'll just be my wife and myself onboard when on the lift . No kids .

Thanks in advance .

Rich Mc
Like Post Reply

#2
(07-06-2016, 03:27 PM)Adventurous Soul Wrote: I'm about to purchase a 3500 open w / Cummings diesels , generator and hardtop . Will a 20 K lift be enough for this vessel ? Or do I have to go up to a 24 K lift . I have a pretty good price for a 20 k lift but when I asked about upping the lift to a 24 K , the price went up substantially . So my question is , how much capacity do need ??? 20 K or 24 K ???? Oh yea, it'll just be my wife and myself onboard when on the lift . No kids .


Update , 13 July . Both of my surveys have been completed . All is really good , with the exception of a few minor issues . The owner has agreed to repair all issues . I expect to actually own the boat in another two weeks . The boat yard that lifted the boat out of the water , their lifts scale didn't work . Big disappointment , so I'm still hoping that someone could clue me in on what their boat weighs or what kind tonnage lift that a 3500 with a hardtop and generator would require .

Thanks in advance .

Rich Mc
Like Post Reply
#3
I have the same boat and when I trucked mine I think it weighed out at around 21,500 and that was minimal stuff on board. It's been almost ten years ago but I'm pretty sure that was what I was told. I don't think I would consider a 20k lift. Maybe someone else will chime in.
Chuck
Like Post Reply
#4
   
Hello

We have a 35 Open with same engines.  Live in Michigan and purchased a lift built by Timmerman Machining which is also a Michigan company.  We bought the 40K lift which was not that much more in cost vs the 25K lift.  It is very well built and works great.  The priced for the 40K was about $5000 more than the 25K, worth doing for future options.  

good luck
Kent
Kent
1999 Tiara 35 Open, Cummins
Like Post Reply
#5
Thanks to all that chimed in . I settled on a 24K lift . 4 new pilings . It's not installed as of yet , but I have a few weeks time until CRACKERJACK reaches her new home port .
Like Post Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Tiara 52 Sovran Salon Keel Question Knot On Call 1 49 Yesterday, 01:16 PM
Last Post: Splendor
  2001 38’ Open interior table base removal twilson0929 3 517 07-07-2026, 08:13 AM
Last Post: hiccup
  1996 33Tiara open - shaft seal lubricant leaking Mydiamond 4 1,172 05-22-2026, 06:41 PM
Last Post: Mydiamond
  [Tiara Open] 2001 3800 Open Holding Tank cap that hold sensor and washdown twilson0929 0 653 05-12-2026, 10:18 AM
Last Post: twilson0929
  [Tiara Open] 1993 Open digitart 0 643 05-12-2026, 08:22 AM
Last Post: digitart



Users browsing this thread:
1 Guest(s)

Boat lift for 3500 open question00