Posts: 1
Threads: 1
Joined: May 2015
Reputation:
0
I have heard that many of the Tiara 3100 owners that have the small rudder have increased the size of the rudder to allow better control at the slower trolling speed used on Lake Michigan.
Has anyone added and extension, is there a source for the extension and what were the results
thanks for your help
Posts: 2
Threads: 0
Joined: Dec 2016
Reputation:
0
Home Port: Salt Lake
The extension won't get the control better.
Posts: 163
Threads: 12
Joined: Dec 2016
Reputation:
0
Home Port: South haven,mi
Vessel Info: 2006 3200 0pen 8.1 crusaders
I made a set for my boat out of 360 stainless and bolted to the back of the existing rudders there easily removed if not wanted. They definitely improve autopilot control when trolling on one motor. I'd post pics but don't see a way to do it.
Posts: 13
Threads: 6
Joined: Dec 2018
Reputation:
0
Home Port: wisconsin
Vessel Info: 1998 tiara 31 express . 2-454 crusaders
I have a 1998 31 open which I bought over the winter. My friend has a 1995 ft taria open and he extended his rudder 4" and tool me that this improved his control while trolling on Lake Michigan which help a bunch. He also suggested that I go 5". I am getting a piece of S.S. made up 10" x 8" which I will lap on the existing rudder 10 " x 3 " . What is the existing rudder made of as I will be bolting the S.S. to ?
Thanks
Posts: 163
Threads: 12
Joined: Dec 2016
Reputation:
0
Home Port: South haven,mi
Vessel Info: 2006 3200 0pen 8.1 crusaders
Your existing rudder should be made of bronze with a stainless shaft. Your in freshwater so won't be a problem using 316 ss screws. How thick of a plate are you bolting on? I did that with a friends searay years ago using 1/4 inch plate but its not very hydrodynamic. Best to bolt into the back of the rudder or have bronze welded onto the back or go with a larger rudder all together. I have even seen custom all stainless rudders. Don't let anyone tell you it won't help, they aren't trying to slow troll with one engine.
Posts: 13
Threads: 6
Joined: Dec 2018
Reputation:
0
Home Port: wisconsin
Vessel Info: 1998 tiara 31 express . 2-454 crusaders
Thanks, I am using 1/4 “ S . S with 3 - 3/8 bolts and I already bolt on to the outside of rudder. Maybe I want to remove and bolt to the inside of each rudder?
Posts: 163
Threads: 12
Joined: Dec 2016
Reputation:
0
Home Port: South haven,mi
Vessel Info: 2006 3200 0pen 8.1 crusaders
I don't think it would matter which side of the rudder you bolt to just be cautious the first few times out when on plane. Be aware that this may have altered the way the boat handles especially when turning and in a downsea. 5 inch extensions may be too much, but you can always cut a little off if you don't like it.
Posts: 38
Threads: 7
Joined: Mar 2018
Reputation:
0
Home Port: Lake Michigan
Vessel Info: 2004 35 Open 8.2L
Tiara advised me not to put extensions on the rudders as the rudder shafts are designed (may break) to snap with a high side load. That is why we went with rudders from a 42 (larger rudder).