Posts: 23
Threads: 8
Joined: May 2015
Reputation:
0
Home Port: Venice Florida
The windshield wiper arm on the starboard window is now overlapping into the center window. I noticed that there are two slotted adjustments on the wiper blade. These have always been loose, and not tightened down on either side. (see attached photos). My question is, should they be tightened down? Or do they need to stay loose as they are now.
2005 36 Sovran.
2005 36 Sovran
Cummings 6C-AT 480
Posts: 158
Threads: 2
Joined: Dec 2010
Reputation:
4
Home Port: Lake Michigan
Vessel Info: 2003 42 Open - Cat C12
I believe those are to make adjustments and should be tightened...
Posts: 23
Threads: 8
Joined: May 2015
Reputation:
0
Home Port: Venice Florida
(06-20-2017, 05:59 PM)Maxwell Wrote: I believe those are to make adjustments and should be tightened...
I appreciate the verification. Makes sense, but as the sixth owner of this vessel I have run across some peculiar modifications to the original configuration.
thanks,
2005 36 Sovran
Cummings 6C-AT 480
