Posts: 10
Threads: 4
Joined: Jul 2019
Reputation:
0
Home Port: Croton on Hudson, NY
Vessel Info: Tiara 3100 LE, 2004, 2 Crusaders.
[attachment=590][attachment=590]Hi - I've stripped my hull of all the bottom paint but came across a cover for the outdrives (both metal and fiberglass as shown in the picture). Does anyone know what's under it and if I should remove and clean before repainting the hull? I don't want to open a can of worms but want to make sure I do the right thing. If so, there's a sealant on the edge & what's used there as well.
Appreciate any advise - thank you!
John
Posts: 481
Threads: 8
Joined: Apr 2018
Reputation:
10
Home Port: Port Canaveral, FL
Vessel Info: 2003 Tiara 50 Open
3406E Cats
I would remove them and paint everything in there. Just because it is covered doesn't mean nothing will grow in there. I will bet if you use a light and look in you will.see older paint in there.
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
And I think those are your prop shafts, not out drives, just so you know the correct terminology.
Sent from my SM-A505U using Tapatalk
