Posts: 229
Threads: 45
Joined: Dec 2016
Reputation:
2
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
I am tired of my oxidized friggin boot stripe. Has anyone addressed this issue? New decal? Paint it?
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
Yes I have dealt with this and evaluated 3 options: re-gel coating in which case I was told you may have the same issues within a few years, paint or use tape. Tape is definitely the cheapest option and I’ve seen some pretty good results when done right. The paint option (I would recommend Awlgrip super jet black) if done right will last a long time and will look beautiful but will cost the most. I’ve never been able to master it but some craftsman can brush Awlgrip with it still looking like a spray finish which saves a lot of time and cost.
Posts: 398
Threads: 37
Joined: Jun 2020
Reputation:
3
Home Port: Annapolis, MD
Vessel Info: Currently looking
I would paint. The trick to a good finish (as is often the case) is in the prep work. Sand till it’s smooth, tape meticulously, then wait for the perfect temp day (think low 70’s, low wind/humidity) to get to painting. If at any point you’re thinking to yourself “I’ve gotta get this done to get back in the water,” you’re rushing it and the finish will look like trash.
Posts: 229
Threads: 45
Joined: Dec 2016
Reputation:
2
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
I am at the "Get in the water" point now so I will wait until next year. I am thinking I will paint. I have rolled and tipped before and am comfortable doing it. Thanks for the feedback
Boot Stripe !!!
