I've been chasing a fuel supply issue and suspect the solenoid cut off (that is ahead of my aftermarket Racors); You can tell by the photo why I suspect it! it's easiest for me to just bypass it to test before replacing the whole thing, but I need to grab a coupler / barb. Does anyone know what size fuel line, and what size hose fittings are used for the fuel line that screws into the coupler? The solenoid is 1/2" NPT, and the coupler going into it (circled in orange in attached photo) looks like a reduced size, so I suspect 3/8" NPT fitting for the fuel line female fittings, and 5/16" or 3/8" ID fuel line? If anyone could confirm I'd appreciate the help.
Thread Rating:
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 1996 33Tiara open - shaft seal lubricant leaking | Mydiamond | 4 | 684 |
05-22-2026, 06:41 PM Last Post: Mydiamond |
|
| [Tiara Open] 2001 3800 Open Holding Tank cap that hold sensor and washdown | twilson0929 | 0 | 444 |
05-12-2026, 10:18 AM Last Post: twilson0929 |
|
| [Tiara Open] 1993 Open | digitart | 0 | 460 |
05-12-2026, 08:22 AM Last Post: digitart |
|
| [Tiara Open] Crusader MP7.4L Air Inlet Tube | mikezacharias | 6 | 2,274 |
04-28-2026, 06:17 PM Last Post: bob4144@icloud.com |
|
| Tiara 3700 Open | Runaway | 2 | 897 |
04-20-2026, 04:26 PM Last Post: hiccup |
|
| Users browsing this thread: |
| 1 Guest(s) |