[Tiara Convertible] Tiara 1990 36 Convertible Windlass Installation

[Tiara 3600]

I also posted this question on the Hull Truth forum. I bought a 1990 Tiara model 3600C flybridge and it doesn't have a windlass. I bought a Maxwell HRC-8 and installing with the help of a friend. Tiara ran power cables up to the anchor locker even though the boat didn't come with a windlass (you have to love Tiara). I figured, if they would run the power cables (big & expensive) they'd also run a spare set of control wires (small gauge & inexpensive). I search the anchor locker for a spare set of wires & did find wire that looks like speaker wire (clear & you can see the wire stands) not terminated to anything. I've been climbing around under the helm looking for a set of wires that look the same & the only ones I'm finding are terminated to something. I guess my question is, does anyone have the same boat & know what the windlass wires look like? If I can't find the wire I guess I could put the remote switches up by the windlass. Any help would be greatly appreciated!!!

[Misdirection]

My dock neighbor has an 88 or 89 3600 Convertible. He probably won't launch for another month, but when he does, I'll see if I can check out his wiring and snap a few photo's if possible.

Sent from my SM-A505U using Tapatalk

[Misdirection]

Ok, my dock neighbor does not have a windlass installed! Gotta be one of the only boats on my dock that doesn't.

Sent from my SM-S901U using Tapatalk