Posts: 28
Threads: 9
Joined: Jul 2017
Reputation:
0
Home Port: Florida
Vessel Info: Express 2000 cat 3208
I have a 2000 40 Express with the enclosed dive platform. It fills with water both when running with sea water, and also if it rains. I have put a hose on the inside drain that drains into my bilge.
Problem is always water in the bilge. I was thinking of directing water from platform into grey water box. The other solution is to not worry about the water in the platform.
Any suggestions.
Dave
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
02-07-2019, 02:24 PM
(This post was last modified: 02-07-2019, 02:26 PM by Uhehner.)
Can you pump air into the platform and listen for air leaks on the outside ?
Capt. George
Maybe put soapy water around any seams and look for bubbles"
Posts: 28
Threads: 9
Joined: Jul 2017
Reputation:
0
Home Port: Florida
Vessel Info: Express 2000 cat 3208
I am pretty sure it is coming from the seam around the outer edge which I have had caulked a few times over the years. It never seems to work. Water still comes in.
I think Tiara must expect this as they put two drains in. The question for me is do I set up a drain to the grey water box or just leave the water in there.
Posts: 28
Threads: 9
Joined: Jul 2017
Reputation:
0
Home Port: Florida
Vessel Info: Express 2000 cat 3208
I actually think I found the problem. I hooked a hose to the drain in the bilge and ran water in to the platform. It took a lot but eventually the water started coming out of a fitting that the previous owner put on. He had through bolted through the platform with a backer plate on the underside.
I took everything apart and had new backer plate made up. Put all back together with 5200.
I also put a fitting on the drain and ran a hose into the grey water tank. That way if any water does get in it will drain into the tank and be pumped overboard. I used a T fitting to tie into a hose already going into the tank.
Dave
Posts: 12
Threads: 0
Joined: Jun 2013
Reputation:
0
Home Port: South Florida
Vessel Info: 2000 Tiara 4000 w/Cats 3208 435HP
I did not know that the platform in the 4000 express had a drain plug in the inside of the boat.
I thought the only one was the one outside under it.
Could you share with me where to find it inside?
Posts: 4
Threads: 1
Joined: Mar 2019
Reputation:
0
Home Port: Lake Erie
Vessel Info: M4 (4000 Mid-cabin)
2000
Cat 3208 435 HP
It's just aft of the hydraulic pump, on centerline. I had the yard replace with an elbow and a valve. Elbow to direct water away from the electric/hydraulic system, and valve for in case of severe damage to platform. I leave the valve open, draining into aft bilge.