Posts: 21
Threads: 4
Joined: Sep 2019
Reputation:
0
Home Port: Vero Beach, Florida
Vessel Info: Tiara 3600 open Classic
1995
Cat 3208 375 HP Diesels
04-22-2024, 03:53 PM
(This post was last modified: 11-01-2024, 10:39 AM by Sasha.
Edit Reason: update
)
No longer available.
Thank you.
Posts: 2
Threads: 0
Joined: May 2024
Reputation:
0
Home Port: Grand Haven
Vessel Info: Currently searching
New to the forum and just found your ad. Do you have more pics? Is there AC in the helm? What bottom work was done?
I am in michigan and very interested. Looking for that layout.
Thanks, Bryan
Posts: 2
Threads: 0
Joined: May 2024
Reputation:
0
Home Port: Grand Haven
Vessel Info: Currently searching
I sent you a message using the email in your post. Perhaps went into spam! mine is bmholms@hotmail.com
Posts: 21
Threads: 4
Joined: Sep 2019
Reputation:
0
Home Port: Vero Beach, Florida
Vessel Info: Tiara 3600 open Classic
1995
Cat 3208 375 HP Diesels
[quote="Sasha" pid='20542' dateline='1717422167']
BOTTOM work + Yearly Haul Out-November 2023: Bottom was sanded down and primed plus two coats of ablative CSC Black paint which is appropriate for these waters. Props trued and trimmed to 25" per the performance test curve by Tiara to reach 2800+ rpm's at 34 MPH. Shafts dialed and in specification, tanks flushed and cleaned after topping off with new diesel to reach all tank surfaces, primary and secondary fuel filters changed, new 1.7 SEASTAR hydraulic helm pump and Rudder cylinder, replaced tank senders with KUS Reed switch level sensor output 240-30 Ohms, dropped rudders, cleaned shafts and repacked, new cutlass bearings. Work performed at Cracker Boy's Fort Pierce - cost with haul, launch and bottom cleaning plus miscellaneous parts, consumables and materials $12k.
yes text (772) 538-7578 for further information. Thank you.
Posts: 1
Threads: 0
Joined: Jul 2024
Reputation:
0
Home Port: Michigan and Florida
Hello,
If this is still available, I’m very interested.
Thanks!
