Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
01-19-2015, 03:37 PM
(This post was last modified: 01-20-2015, 08:08 AM by Uhehner.)
Be aware that 12 volt DC LED's are polarity sensitive. If they don't illuminate there is a chance the lamp is installed backwards. If you are installing LED's in a 120 volt AC circuit be aware that they do not dim as low as halogen lamps. Search on eBay, there are loads of LED replacement lamps from China. Capt. George
Posts: 80
Threads: 18
Joined: Sep 2013
Reputation:
0
Home Port: Traverse City MI
Vessel Info: 1999 Tiara 35 Open, Cummins 6BTA's
Thanks! I just ordered about 30 bulbs and will replace all of the interior cabin lighting and the helm and cockpit lighting. Will post results and if the lighting looks as good as the lighting I'm replacing.
Kent
1999 Tiara 35 Open, Cummins
Posts: 80
Threads: 18
Joined: Sep 2013
Reputation:
0
Home Port: Traverse City MI
Vessel Info: 1999 Tiara 35 Open, Cummins 6BTA's
LED's project turned out perfect! Used Marinebeam lights, great people to work with. Will post a picture soon.
http://store.marinebeam.com/find-your-led-bulb/
Kent
1999 Tiara 35 Open, Cummins
Posts: 56
Threads: 8
Joined: Jul 2013
Reputation:
0
Home Port: Catawba Island, Ohio
Vessel Info: 36 Sovran
2006
Cummins QSC 490h
Which bulb did you use.
Thanks
John
36 Sovran, Cummins QSC
Posts: 80
Threads: 18
Joined: Sep 2013
Reputation:
0
Home Port: Traverse City MI
Vessel Info: 1999 Tiara 35 Open, Cummins 6BTA's
All Marine Beam products
TW-G4-36-WW to replace the 20 W spots in the cabin ceiling
SP-G4-21X for the two dome lights (one in cabin and one in bath)
FL-T8-102 to replace the fluorescent bulbs in the forward berth
SP-G4-09-WWB to replace all the puck lights. They go from soft white to blue with a 2nd flick of the switch.
FS-42-06 for the Festoon in helm area
FS-37-06 for the Festoons in the cockpit
Ended up purchasing new reading lights in the forward berth with FX-RD-10-TIN
Nice lighting, no heat......
Kent
1999 Tiara 35 Open, Cummins
Posts: 63
Threads: 11
Joined: Feb 2014
Reputation:
1
Home Port: Coral Gables, FL
Vessel Info: 2007 Tiara Sovran 4300
I just placed an order for 6 replacement bulbs to try them in my cabin ceiling from Marine Beam. If I like them, will order the 30 more that I need. Their website and information is tremendous.
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
The most informative statement was "They should be rated "8 to 30 volts", not just 12 volts. I will shop more carefully now. Capt. George
Posts: 63
Threads: 11
Joined: Feb 2014
Reputation:
1
Home Port: Coral Gables, FL
Vessel Info: 2007 Tiara Sovran 4300
06-07-2015, 09:41 PM
(This post was last modified: 06-07-2015, 09:51 PM by DavidB.)
Just replaced all the hot halogen lights with LED's. Looks great and a big decrease in the heat output. I do have an issue though with 3 of the existing ceiling fixtures not working (probably burnt out from the heat). I have started looking for the original type of fixture and it appears that they are not available. I was wondering if anyone has any they would like to sell ? It is the Imtra "Hatteras" flush mount series with the white rings.
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
Halogen light sockets do corrode and burn out from the heat but why not change just the socket. They are pretty standard and can be found on eBay. This should be easier than trying to locate a matching fixture. They are real inexpensive too. I have changed quite a few. Capt. George
Posts: 18
Threads: 3
Joined: Sep 2020
Reputation:
0
Home Port: Long Island Sound
Vessel Info: 2005 Open 3600
Cummins QSB 5.9
Could anyone tell me how to get at the bulbs in the cabin? Don't want to break the "pucks" or any of the other fixtures. Thank you